Fractional co2 laser equipment skin laser resurfacing machine wholesale

Product Enquiry


This is a fractional CO2 laser equipment made by Sincoheren beauty machine factory which combines professional laser tools with customer-friendly design and high-precision technology to fulfill the needs of customers. Sincoheren is a professional skin resurfacing machine manufacturer, who is devoted to innovation and development in skin laser resurfacing technology since 1999.



Fractional CO2 lasers give you and your patients a highly targeted, effective, aesthetic treatment for even the toughest skin problems.
The result is less redness, less discomfort, shorter healing time, and better skin rejuvenation results.

  • The model of CO2 laser therapy system is Monaliza-5.
  • Its power is 30W, and the wavelength is 10.6µm ± 0.1µm.
  • It is a multifunctional and comprehensive therapy system which includes 2 surgical handpieces, 1 scan handpieces, and 4 gynecology handpieces.

It is mainly used for cutting, burning, vaporizing, coagulation and irradiation of human tissues to remove benign pigmented nevus, benign neoplasm on skin surface and improve all kinds of scars. It can also treat gynecological diseases such as genital atrophy, vaginal relaxation, vaginal dryness, stress urinary incontinence, etc.

Working Principle

How Surgical CO2 Lasers Work?
The CO2 laser wavelength, 10.6 μm, is absorbed well by water in the tissue (add new illustration). For this reason, the CO2 laser affords the benefit of more precise cutting and ablation compared to all other energy devices and alternative laser wavelengths. The CO2 laser has the smallest zone of thermal spread ≈ 0.1mm(depending on the water content of the tissue and the laser parameters), therefore, it provides unprecedented precision and ability to safely operate near critical structures and delicate anatomy.

How to work for scars wrinkle removal?
The fractional co2 laser vaporize lines, wrinkles, scars, dark spots and other irregularities, layer by layer. This process also stimulates the formation over time of new, underlying collagen to provide better elasticity and support for the skin. The fractional co2 laser vaporize lines, wrinkles, scars, dark spots and other irregularities, layer by layer. This process also stimulates the formation over time of new, underlying collagen to provide better elasticity and support for the skin.

How to work for vaginal tightening?

Vaginal tightening laser is the use of water uptake 10600nm gold standard laser, using a three-dimensional lattice technology and 360- degree circular emission perfect combination of technology, to produce 50-70 degrees Celsius in a controlled depth of the vaginal mucosa, stimulate lamina propria and myometrium newborn fibroblasts, and damaged collagen fibers, elastic fibers, such as restructuring, so as to achieve vaginal wall thickening and tightening of the vagina so that firmness, sensitivity enhancement, vagina tight as ever.


Fractional co2 laser is designed to cut, burn, vaporize, and solidify tissue for different surgery purposes with different handpieces.

  • Skin renewing and resurfacing
  • Wrinkle removal, skin tightening
  • Age spots and acnes scars removal
  • Smooth burnt scars and surgical scars
  • Remove intractable chlosma and pigmentation
  • Sun damage recovery
  • Cut skin neoplasm and abnormal growth
  • Vaginal tightening and rejuvenation
  • Improvement of vulva/areola color, and vagina health


Laser wavelength10.6µm;
Laser average power CW:0-30W;SP:0-15W
Laser peak power CW: 30W;SP:60W
Treatment hand pieceScanning hand piece(f50mm)
Surgical hand pieces(f50mm,f100mm)
Gynecology hand piece(f127mm)
Spot size0.2mm
Scanning areaMin: 3mmX3mm; Max: 20X20mm
LCD screen12.1 inches
Aiming beam power< 5mW
Aiming beam wavelength 635nm
(not include Articulated arm, L×W×H)
Power supply110-240VAC,50-60Hz;


Brief introduction of Working Model

  • The Mode of Output System
  • Laser Working Model


Brief introduction of handpiece and operation

  • Two Cutting Handpieces
  • One Scanning Handpiece
  • Four Gynecology Handpieces ( 2 inside and 2 outside)



Ø Patient selection (indications and contraindications)

Ø Preparation of the treatment area

Ø Instrument preparation (sterilization, cleaning, etc.) • Operating instructions

Ø Different functions of different hand tools



Ø Care points for the inside of the vagina after treatment

Ø Judgment of curative effect


Before surgery


  1. Vulvar atrophy
  2. Tightening of the labia majora
  3. Improve the color of the vulva
  4. Areola color improvement
  5. Vaginal dryness
  6. Vaginal health (sensitivity, lubrication improve)
  7. Vaginal tightening
  8. Stress incontinence
  9. Mild uterine prolapse



  1. The patient has a serious disease: cancer, HIV, heart rate disorders, severe diabetes, Grade III hypertension, etc.;
  1. Pregnancy, lactation, 6 months after childbirth. Within the period of returning to normal hormones;
  1. Serious gynecological diseases, such as cervical cancer, Vaginal cancer, polyps, etc.;
  1. STD patients: condyloma acuminatum, syphilis, Genital herpes, gonorrhea, etc.;
  1. Those within half a year after curettage such as induced abortion;
  2. Those whose reproductive system is in the acute inflammation stage: Pelvic inflammatory disease, cervicitis, vaginitis, vagina Endometritis, etc. and daily perceived pain etc.


Preparation of the treatment area:

  1. Preparation of the outside of the vagina: skin preparation, first remove the hair; then rinse the treatment area with normal saline for 2~3 minutes, rinse

Dry the treatment area with sterile gauze after completion; generally, no anesthesia is required, but if the patient is more sensitive, it can be applied on the surface of the treatment area

Apply topical anesthetic cream for more than 30 minutes, then wipe off the anesthetic cream with gauze, rinse again with normal saline, and wipe with sterile gauze

Dry the treatment area or part; after finishing, wipe the treatment part with alcohol cotton from the inside out without repeating, and then let it dry naturally

Start treatment.

  1. Disinfection in the vagina

Cleaning and disinfecting the vagina before intravaginal treatment can effectively remove bacteria and secretions in the vagina and provide safety for the operation.

Guaranteed to reduce the chance of intraoperative and postoperative infection. It is generally required that the patient does not have vaginal inflammation in the acute phase.

Commonly used disinfection methods:

Ø Iodophor cotton ball: can be clamped with hemostatic forceps. Disinfect the vaginal wall, cervix, vaginal opening, and vestibule. Then dry with a sterile dry cotton ball.

Ø Potassium permanganate lavage solution: expose the vagina with a disposable colposcope. Rinse with 500~1000ml of potassium permanganate solution with a temperature of 41~43 degrees

Wash the anterior vaginal wall, fornix and cervix, and wipe the fluid inside the vagina with sterile gauze after lavage.

Ø Ozone Sterilization Cleansing Yin Therapy Apparatus: Connect a disposable catheter, gently insert the catheter into the vagina and turn it around to make the ozone mist fully connect.

Touch the vaginal wall for about 10 minutes at a time, and then discard the disposable catheter after disinfection.


3. Vaginal anesthesia: (Generally, there is no need for anesthesia in the vagina, because the energy will not be very high during treatment, but if the patient is pain-sensitive, and anesthesia may be considered appropriate.

Anesthesia method:

Ø 0.1% lidocaine gauze: take a piece of sterile gauze, fully wet it with 0.1% lidocaine, and then put it into the vagina for 5~10 minutes; You can take it out after an hour.


Cleaning and disinfection of hand tools:

Ø Because the hand tool is not disposable, it needs to be reused many times. At the same time, the carbon dioxide fractional laser treatment is a

Therefore, strict cleaning, disinfection, and sterilization should be carried out on the equipment before and after each use, so that the

To prevent the risk of cross-infection. Ø Method and procedure: Fully disassemble all parts of the hand tool, rinse thoroughly with running water and brush if possible

All parts, especially those with seams or other parts that are very likely to cause dirt accumulation and residues and the inner wall of the lumen; then

Some parts are fully soaked in the disinfection solution for 30 minutes; take out the hand parts, and rinse the inner and outer walls of each part with pure water;

Dry the appliance with non-silk absorbent cotton, being careful not to rub it back and forth, just press lightly to dry the moisture on the appliance; then

Wipe each part of the appliance thoroughly with alcohol cotton, and then let it dry naturally.


Operating Instructions

  • Nodding:

Ø Application: It is used to strengthen the treatment of vaginal opening and labia minora after vaginal tightening.

Ø Usage: According to the position, select the appropriate graphics in the operation interface. Due to the limitation of the position, generally adjust the smaller area. treat

When the point of the head of the handpiece needs to touch the treatment site for support and keep the handpiece perpendicular to the treatment site, then you can start


  • Double nods:

Ø Application: Mainly used for the treatment of vulvar atrophy and color improvement.

Ø Usage: same as above, see how to use nodding


Gynecological Bevel Head:

Ø Uses: Mainly used to treat stress urinary incontinence and vaginal dryness.

Ø Usage: The main action site is the tissue between the vagina and the urethra. Therefore, during treatment, the cannula is first put into the vagina

Then place the bevel side up into the cannula to start the treatment. During treatment, according to the size of the figure, appropriate

The receding bevel head hand tool (if the graph is set to be a circle, the x value is the receding distance), until the entire inner wall is

Treatment is complete.

  • Gynecological Cone:

Ø Uses: Mainly used for the treatment of vaginal relaxation and vaginal rejuvenation.

Ø Usage: Same as above.

In the above steps, when Taoguang is put into the vagina, if necessary, apply a sterile moisturizing agent to the outer wall of the cannula.


Postoperative care points:

①It is necessary to abstain from sexual intercourse within 72 hours after each treatment.
②No swimming within one week after treatment.
③ It is normal if there are occasional bloodshots in vaginal secretions after treatment. Don’t worry too much, it usually recovers naturally.
④ It is not recommended to use vulvar lotion and other items to clean the vagina and vulva.
⑤ Patients should change their underwear frequently to ensure the cleanliness of their private parts.
⑥ After 48 hours, half a month, and one month after treatment, the operator can ask the patient to come for a follow-up consultation. Fill out the assessment question and answer to evaluate the treatment effect.

 Judgment of postoperative efficacy:
① Evaluation of the efficacy of intravaginal treatment: Intravaginal treatment is generally mainly about vaginal tightening (LVT: Laser Vaginal Tightening), vaginal dryness, etc.
It is based on the internationally accepted FSFI (Female Sexual Function Index) (see appendix 1) to evaluate women’s vaginal tightening and vaginal health treatment after treatment.
②Evaluation of curative effect of vulvar treatment: Vulvar treatment is mainly the rejuvenation treatment of vulvar skin, including improvement of vulva color (commonly known as “bleaching yin”), skin Atrophy tightening and skin rejuvenation treatments, etc., are almost indistinguishable from facial scans as far as the treatment itself is concerned, the two are similar.


Inquire now

    Please prove you are human by selecting the Flag.


    There are no reviews yet.

    Be the first to review “Fractional co2 laser equipment skin laser resurfacing machine wholesale”

    Your email address will not be published.


    Style Switcher

    Header Style
    Pre Define Colors

    Custom Colors